Audiovox CDM-4000 - Manual (Page 45)

45
To Store the Voice Mail Access Number
Please see To Store Linked Numbers in Phonebook
on page 38, and follow the steps 1 ~ 3 to make a set of
linked numbers. Press STO STO V to store. Up to 80
digits of linked numbers can be stored including link
mark “ = ”. You can also add a Name Tag (up to 20 to 24
characters) with your voice mail number. (See To Store
a Name with Phone Number on page 27.)
To Call Your Voice Mail
1. Press and hold V . The first number will be dis-
played and dialed.
2. Press V . The second number will be displayed
and sent in Touch Tone™ signal.
3. The succeeding numbers can be sent sequentially
by pressing V .
To Review the Voice Mail Access Number
1. Press Rcl to select the Phonebook Address
Mode.
2. Press V . The first linked number in V will be
displayed.
3. Press F (one or more times) to display the re-
maining linked numbers in
V
.
Text Messages (Short Message Service)
Your phone is able to receive and display Text Mes-
sages of up to 255 characters long. The Text Message
memory stack can store up to 30 messages. When an
SMS message is received, the following occurs.
1. A short beep tone sounds.
2. The indicator at the upper right of the display
flashes to alert you.
The display indicates “NEW
MESSAGE” with animation.
3. The Text Message just re-
ceived is stored in the Memory Stack. To review
stored messages, see To Review a Text Message
on page 46.
4. If the Memory Stack is full, any new Text Messages
will not be stored, and you
will have the display: