Getting started, Turning the phone on/off, Antenna position – Audiovox CDM-4000 User Manual

Page 16: Receiving signal strength indicator ( ), Battery level indicator, Power management

Advertising
background image

16

GETTING STARTED

GETTING STARTED

Turning the Phone On/Off

Press

for more than one second. All the indicators

and the digit display will light momentarily, and a tone will

be heard. The indicator will stay while the phone is

turned on.

To turn the phone off, press

for more than one sec-

ond.

Antenna Position

The antenna can be used in its fully extended or fully re-

tracted position only. It is recommended that the antenna

should be fully extended for optimum performance and

signal strength or while operating in poor signal areas.

Receiving Signal Strength Indicator (

)

The number of lines indicates the Signal Strength in

your area. Four lines show the maximum level. The dis-

play will vary as you move with the phone. If the signal

is not strong enough to place a call, “No Service” will

appear on the LCD display.

Battery Level Indicator

You can always monitor the battery charge condition

with the constant battery level indicator. The number of

blocks indicates the battery conditions as follows:

Full charge

Low charge

Flashing indicates discharged.

Power Management

Battery

Slim Battery

(BTR-4000)

Extended

(BTE-4000)

Mode

CDMA

Analog

CDMA

Analog

Talk Time

up to

190 min.

65 min.

380 min.

130 min.

Standby Time

up to

170 h

12 h

340 h

24 h

The operating times are approximate values and may

vary depending on network configuration and handset

usage.

Advertising
This manual is related to the following products: