Canon VIXIA HF R42 - Manual (Page 153)

Additional Information
Š 153
• If the memory card you insert already contains a file with a larger num-
ber, a new file will be assigned a number one higher than that of the last
file on the memory card.
• We recommend using the [n Continuous] setting.
• Folder names, on the other hand, appear in a format such as
“101_0501”. The first three digits indicate the folder number and the last
four digits indicate the month and day (May 1, for the example folder
above). In the same example, a recording with a file number of
“101-0107” is saved in the folder DCIM\101_0501 with a file name of
“MVI_0107.MP4” (for MP4 movies) or “IMG_0107.JPG” (for photos).
• Folders can contain up to 500 files (MP4 movies and photos combined)
and a new folder is created every time a folder exceeds this number.
• The first three digits of the file number range from 100 to 999 and the
last four digits range from 0001 to 9900. File numbers are automatically
assigned consecutive numbers.
[Auto Power Off]: In order to save power when the camcorder is powered
by a battery pack, it will automatically shut off if left without any operation
for 3 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power
Off] will appear. Operating any of the camcorder’s controls while the
message is displayed will prevent the camcorder from shutting off.
[Power On Using LCD Panel]: If set to [Enable], opening the LCD panel
turns the camcorder on while closing the LCD panel turns it off. Set to
[Off] to deactivate this feature. In either case, you can still use
.
[Firmware]: You can verify the current version of the camcorder’s firm-
ware, which is the software that controls the camcorder. This menu option
is usually unavailable.
[Reset All]: Resets all of the camcorder’s settings.
COP
Y