Initial preparations, Attaching the strap, Holding the camera – Canon PowerShot S120 User Manual

Page 12: Charging the battery pack

Advertising
background image

12

1
2
3
4
5
6
7
8
9
10

Cover

Before Use

Common Camera
Operations

Advanced Guide

Camera Basics

Auto Mode /
Hybrid Auto Mode

Other Shooting
Modes

Tv, Av, M, and
C Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

z

z

Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).

z

z

The strap can also be attached to the left
side of the camera.

Holding the Camera

z

z

Place the strap around your wrist.

z

z

When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.

Charging the Battery Pack

Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.

1

Insert the battery pack.

z

z

After aligning the

 marks on the battery

pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).

2

Charge the battery pack.

z

z

CB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).

z

z

CB-2LYE: Plug the power cord into the
charger, then plug the other end into a
power outlet.

z

z

The charging lamp turns orange and
charging begins.

z

z

When charging is finished, the lamp turns
green.

CB-2LY

CB-2LYE

Advertising