Canon PowerShot S120 User Manual
Page 62
62
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, and
C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
•
You can also shoot as usual by pressing the shutter button.
•
The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
•
To change the number of shots, press the <
o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
You can also choose the shooting mode by choosing [
] in steps 1 – 2 of
“Specific Scenes” (
] to access the setting screen,
touching [
], and then touching the same option or [
].
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1
Choose [
].
z
z
Follow steps 1 – 2 in “Specific Scenes”
(
) and choose [
], and then
press the <
p> button.
z
z
Press the <
q><r> buttons or turn the
<
7> dial to choose [ ], and then press
the <
m> button.
2
Compose the shot and press
the shutter button halfway.
z
z
On the screen, touch the face of the
person who will wink to choose it (Touch
AF), and then press the shutter button
halfway.
z
z
Make sure a green frame is displayed
around the face of the person who will
wink.
3
Press the shutter button all the
way down.
z
z
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
z
z
The lamp blinks and the self-timer sound
is played.
4
Face the camera and wink.
z
z
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
z
z
To cancel shooting after you have
triggered the self-timer, press the
<
n> button.
•
If the wink is not detected, wink again slowly and deliberately.
•
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
•
If winking is not detected, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <
o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
•
You can also choose the shooting mode by choosing [
] in steps 1 – 2 of
“Specific Scenes” (
), touching [
] to access the setting screen,
touching [
], and then touching the same option or [
].