Canon PowerShot S120 User Manual
Page 66
66
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, and
C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
4
Check the brightness.
z
z
Press the shutter button all the way down
to shoot a single still image.
z
z
Switch to Playback mode (
) and
check image brightness.
z
z
To adjust the brightness, press the
<
o> button on the shooting screen and
change the exposure level by turning the
<
7> dial. Check brightness again by
taking another shot.
5
Shoot.
z
z
Press the movie button. [Busy] is
displayed briefly, and then shooting
begins.
z
z
Do not disturb the camera while shooting.
z
z
To cancel shooting, press the movie
button again.
z
z
The camera operates in Eco mode
(
) while shooting.
Estimated Shooting and Playback Times
Session Time
Playback Time
[120']
Approx. 8 sec.
[90']
Approx. 6 sec.
[60']
Approx. 4 sec.
•
If the camera runs out of battery power or memory card space,
shooting stops and a movie created from the images up to that point
is saved.
•
Maximum available shooting duration varies depending on free
space on the memory card.
•
Optical zoom is set to maximum wide angle and cannot be adjusted.
•
There will be a delay before you can shoot again, as the camera processes
the images.
•
To save each shot collected before the movie is created, choose MENU ►
[
4] tab ► [Save Stills] ► [On]. Note that these individual images are
managed as a single group, and during playback, only the first image is
displayed. To indicate that the image is part of a group, [
] is displayed
in the upper left of the screen. If you erase a grouped image (
images in the group are also erased. Be careful when erasing images.
•
•
Switch to manual focus mode (
) to more accurately specify the focal
position before shooting.
•
This mode can correct white balance and match the effect of using a
commercially available color-compensating filter (