Pre-recording mode, Pre-recording mode 110, Cop y – Canon EOS C300 PL User Manual

Page 110

Advertising
background image

Special Recording Modes

110

Pre-recording Mode

When pre-recording mode is activated, the camcorder starts recording
continuously into a temporary memory of approximately 3 seconds so
when you press the START/STOP button, the clip will contain also
approximately 3 seconds of video and audio recorded before you pressed
the button.

1 Open the [Special Rec] submenu.

[w Other Functions] > [Special Rec]

2 Select [Pre Rec] and then press SET.

• [PRE REC STBY] appears at the top of the screen.

3 Press the START/STOP button to begin recording.

• The tally lamp illuminates.

• [PRE REC STBY] changes to [Ü PRE REC] while recording.

4 Press the START/STOP button again to stop recording.

• The camcorder records the clip, including approximately 3 seconds of video and audio recorded before the

START/STOP button was pressed.

• The tally lamp goes out and [PRE REC STBY] appears at the top of the screen.

NOTES

• You can use only one special recording mode at a time.

• Pre-recording mode will be deactivated if the special recording mode is changed or turned off. It will be

deactivated also if you change the video configuration.

• During pre-recording mode, the time code will be recorded with the running mode (A 84) set to [Free Run],

regardless of the previous setting. Alternatively, you can use an external time code signal. When the time code
is recorded, it will include the 3 seconds before the START/STOP button was pressed. When special recording
mode is deactivated, the running mode will return to its previous setting.

[w Other Functions]

[

Special Rec]

[Off]

COP

Y

Advertising
This manual is related to the following products: