Canon PowerShot SX170 IS - Manual (Page 116)

116
1
2
3
4
5
6
7
8
9
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (
=
92 ).
•
There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
• Adjust the volume ( = 70 ) if you have activated [Mute] ( = 88 ) or the sound in
the movie is faint.
•
No sound is played for movies shot in [ ] mode (
=
47 ) because audio is not
recorded in this mode.
Memory Card
The memory card is not recognized.
• Restart the camera, with the memory card in it ( = 21 ).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
•
Press the <
1> button to enter Playback mode. Hold the <n> button down as
you press the < o> and <m> buttons at the same time. On the next screen, press
the <
q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images (
=
111 ).
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (
=
13 ).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
= 13 ).
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
= 13 ).
Memory card error (
=
92 )
• If the same error message is displayed even after you have formatted a supported
memory card (
= 2 ) and have inserted it facing the correct way ( = 13 ), contact
a Canon Customer Support Help Desk.
Insufficient space on card
• There is not enough free space on the memory card to shoot ( = 28 , 42 , 51 ,
65 ) or edit images (
=
82 – 84 ). Either erase unneeded images (
=
78 ) or
insert a memory card with enough free space ( = 13 ).
Charge the battery (
=
12 )
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! (
=
75 )
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.