Canon PowerShot SX170 IS - Manual (Page 37)

37
1
2
3
4
5
6
7
8
9
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Still Images
Red-Eye Correction
Red-eye that occurs in flash photography can be automatically corrected as
follows.
1
Access the [Flash Settings]
screen.
z z
Press the <
n> button, choose [Flash
Settings] on the [
4] tab, and then press
the <
m> button ( =
24 ).
2 Configure the setting.
z z
Choose [Red-Eye Corr.], and then
choose [On] (
=
25 ).
z z
Once the setting is complete, [ R] is
displayed.
z z
To restore the original setting, repeat this
process but choose [Off].
•
Red-eye correction may be applied to image areas other than eyes (if
the camera misinterprets red eye makeup as red pupils, for example).
• You can also correct existing images ( = 84 ).
• You can also access the screen in step 2 when the flash is up by pressing the
<
r> button and immediately pressing the <n> button.
Movies
Changing Movie Image Quality
2 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (
=
129 ).
z z
Press the <
m> button, choose [
] in
the menu, and choose the desired option
(
=
23 ).
z z The option you configured is now
displayed.
z z
To restore the original setting, repeat this
process but choose [
].
Image
Quality
Resolution Frame Rate Details
1280 x 720 25 fps For shooting in HD
640 x 480 30 fps
For shooting in standard
definition
•
In [ ] mode, black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.