Choosing images individually, Selecting a range – Canon PowerShot SX170 IS User Manual
Page 76
76
1
2
3
4
5
6
7
8
9
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Choosing Images Individually
1
Choose [Select].
z
z
Following step 2 in “Using the Menu”
(
), choose [Select] and press the
<
m> button.
2
Choose an image.
z
z
Press the <
q><r> buttons or turn the
<
5> dial to choose an image, and then
press the <
m> button. [ ] is displayed.
z
z
To cancel selection, press the <
m>
button again. [
] is no longer displayed.
z
z
Repeat this process to specify other
images.
3
Protect the image.
z
z
Press the <
n> button. A
confirmation message is displayed.
z
z
Press the <
q><r> buttons or turn the
<
5> dial to choose [OK], and then press
the <
m> button.
•
Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Selecting a Range
1
Choose [Select Range].
z
z
Following step 2 in “Using the Menu”
(
), choose [Select Range] and
press the <
m> button.
2
Choose a starting image.
z
z
Press the <
m> button.
z
z
Press the <
q><r> buttons or turn the
<
5> dial to choose an image, and then
press the <
m> button.
3
Choose an ending image.
z
z
Press the <
r> button to choose [Last
image], and then press the <
m> button.