47 routine maintenance – Canon PIXMA iP100 User Manual
Page 51
Advertising
47
Routine Maintenance
4
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head by aligning the
mark on the ink tank
with the
mark on the Print Head Holder.
(2) Press on the
mark on the ink tank until
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
z
Install both ink tanks to print. The printer cannot be used unless both ink tanks are installed.
z
If the front (innermost) part of the ink tank (A) is sticking up, push down on the Canon logo on
the ink tank as illustrated below. Do not remove the ink tank forcibly.
(3)
(2)
(1)
(A)
Advertising