Canon PIXMA iP100 - Manual (Page 84)

80 Appendix
Specifications
General Specifications
Printing resolution (dpi) 9600 (horizontal)* x 2400 (vertical)
* Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Interface USB 2.0 High Speed* 1
IrDA ver.1.4* 2
Bluetooth v2.0 (option)* 3
*1 A computer that complies with USB 2.0 Hi-Speed standard is required. Since the
USB 2.0 Hi-Speed interface has full backward compatibility with USB Full-Speed
(USB 1.1), it can be used at USB Full-Speed (USB 1.1).
*2 Maximum speed: FIR 4Mbps
Maximum communication range: 20 cm (8 inches)
*3 Bluetooth connection is for printing only.
Print width 8 inches / 203.2 mm max.
(for Borderless Printing: 8.5 inches / 216 mm)
Acoustic noise level Approx. 38.5 dB (A)
* When printing in the highest print quality mode on Photo Paper Pro.
Operating environment Temperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90% RH (no condensation)
Storage environment Temperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
Power supply AC adapter 100-240 V, 50/60 Hz
Power consumption Printing: Approx. 9 W
Standby (minimum): Approx. 1.5 W
OFF: Approx. 0.4 W
External dimensions Approx. 12.7 (W) x 7.3 (D) x 2.4 (H) inches /
Approx. 322 (W) x 185 (D) x 61.7 (H) mm
* With the Paper Support and Paper Output Slot Cover retracted.
Weight Approx. 2.0 kg (Approx. 4.4 lb.)
* With the Print Head and Ink Tanks installed.
Print Head Total 1,856 nozzles (PGBK: 320 nozzles, C/M each 512 nozzles, BK/Y each 256
nozzles)
Camera Direct Print (PictBridge)
Paper size 4" x 6" / 10 x 15 cm, 5" x 7"*, Credit card / 5.4 x 8.6 cm, 8" x 10" / 20 x 25 cm,
A4, 8.5" x 11" (Letter), 4" x 7.1" / 10.1 x 18 cm
* Can be selected only on certain Canon-brand PictBridge compliant devices.
Paper type Default (Photo Paper Plus Glossy), Photo (Photo Paper Plus Glossy, Photo Paper
Plus Glossy II, Glossy Photo Paper, Glossy Photo Paper “Everyday Use”, Photo
Paper Glossy, Photo Paper Plus Semi-gloss, Photo Stickers), Fast Photo (Photo
Paper Pro), Plain Paper (Only A4/Letter)
Layout Default (Borderless), Borderless, Bordered, N-up (2, 4, 9, 16* 1 ), 20-up* 2 , 35-up* 3
*1 Layout compatible with Canon-brand sticker above. See “Recommended Paper
and Requirements” on page 11.
*2 You can print shooting Info (Exif Data) on photos in list format (20-up), or in the
margins of specified photos (1-up). Select Layout, then select the item displayed
with the [i] icon. (Note that this print setting cannot be used for some models.)
*3 Selected photos are printed in 35 mm film style layout (contact printing layout).
This print setting is only available with certain Canon PictBridge compliant
devices.
Image optimize Default (Exif Print), On, Off, VIVID*, NR (Noise Reduction)*, Face*, Red eye*
* If using a Canon PictBridge compliant device, you can select it.