Canon imagePROGRAF iPF610 - Manual (Page 246)

Print quality and color settings
11.
On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired.
Adjustment Item Description
C Cyan
D Magenta
E Yellow
Correct color tones by adjusting the levels of Cyan,
Magenta, and Yellow.
F Brightness Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
G Contrast Adjust the contrast of the darkest and lightest
portions relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
H Saturation Adjust the level of color saturation, in a range from
subdued to vivid.
I Gray Tone Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
12. Click OK to close the Color Settings dialog box.
13.
Access the Page Setup pane.
14. Conrm the settings of A Media Source and C Page Size.
15.
Conrm the print settings, and then click M Print to start printing.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.513)
232 Enhanced Printing Options