Canon imagePROGRAF iPF610 - Manual (Page 47)

Control Panel
Specifying numerical values
Follow the steps below to enter numbers for items such as network settings.
1.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
2.
Press ▲ or ▼ to select TCP/IP, and then press the ► button.
3. Press ▲ or ▼ to select IP Setting, and then press the ► button.
4.
Press ▲ or ▼ to select IP Address, and then press the ► button.
5. Press ◄ or ► to move the cursor (_) to each eld for entering numbers.
6.
Press ▲ or ▼ to select the number, and then press the OK button.
Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• Make sure the IP address you enter for the printer is not the same as any computer IP address
in your network.
7.
Repeat steps 2 and 3 to continue entering numbers.
8. Press the Online button to bring the printer online.
Note
• If a conrmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer goes online.
Printer Parts 33