Canon imagePROGRAF iPF610 - Manual (Page 663)

Cleaning the Printer
Cleaning the Printhead
Cleaning the Printhead may help clear nozzles that are clogged.
Note
• You can specify a number of pages in the printer’s Noz. Check Freq. menu for automatic nozzle
checking and cleaning every time you nish printing that quantity. (→P.50)
• You can start Head Cleaning A by holding down the Information button for three seconds or more.
• Printhead cleaning is not possible if POP Board (1.5 mm [0.06 in] thick) is loaded in the Front Paper
Feed Slot. Remove the paper before cleaning.
Cleaning the Printhead
1. Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Head Cleaning, and then press the ► button.
3.
Press ▲ or ▼ to select the type of cleaning, and then press the OK button.
• Head Cleaning A
Use Head Cleaning A if printing is faint or contains foreign substances. This method of cleaning
consumes the least amount of ink. It takes about four minutes to complete.
• Head Cleaning B
Use Head Cleaning B if no ink comes out of the printhead, or if Head Cleaning A does not solve the
problem. It takes about ve minutes to complete.
The printhead is cleaned, and the printer goes online.
4.
Print a test pattern to check the nozzles, and determine whether cleaning has cleared the
nozzles. (→P.625)
Note
• If printing does not improve after Head Cleaning A, try Head Cleaning B. If this does not solve
the problem, repeat Head Cleaning B two or three times. If this still does not improve printing, the
Printhead may have reached the end of its useful life. Contact your Canon dealer.
Caution
• Do not remove the Maintenance Cartridge or Ink Tanks during cleaning.
Maintenance 649