Canon imagePROGRAF iPF510 User Manual
Page 148
Advertising
Handling rolls
Paper Cutting (to have the roll cut at your specied position)
1.
If the printer stops operating after printing, press the Online button.
The printer goes ofine, and the following screen is displayed.
Ofine
FeedPaper ↑↓
2.
Press ▲ or ▼ to feed the roll paper to the position for cutting.
3.
Select Yes as the Paper Cut in the printer menu, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Paper Cut
= Yes
After the roll paper is cut, it is rewound automatically.
Caution
•
If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
134 Handling Paper
Advertising