Canon imagePROGRAF iPF510 - Manual (Page 586)

Network Setting (Macintosh)
Conguring the Destination for AppleTalk Network
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.
Activating AppleTalk on the printer
Important
• By factory default, the AppleTalk protocol is disabled on the printer.
1. Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3. Press ◄ or ► to select AppleTalk, and then press ▼.
Interface Setup
AppleTalk ↓
4.
Press ◄ or ► to select On and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
AppleTalk
= On
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Important
• Be sure to complete step 5. This will activate the values you have entered.
Note
• By using RemoteUI, you can also specify the object name used by AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see “Using RemoteUI”. (→P.544)
572 Network Setting