Canon imagePROGRAF iPF510 - Manual (Page 555)

Network Setting
Conguring the IP Address Using the Printer Control
Panel
This topic describes how to congure the printer’s IP address on the Control Panel.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3. Press ◄ or ► to select TCP/IP, and then press ▼.
Interface Setup
TCP/IP ↓
4.
Press ◄ or ► to select IP Setting, and then press ▼.
TCP/IP
IP Setting ↓
5. Press ◄ or ► to select IP Address, and then press ▼.
IP Setting
IP Address ↓
6. Press ◄ or ► to move the cursor (_) to each eld for entering IP address numbers.
IP Address
=0.0.0.0
7.
Press the OK button to prepare to enter the number.
8. Press ◄ or ► to select the number, and then press the OK button.
IP Address
=xxx.0.0.0
Note
• Pressing the ◄ button decreases the number by 1. The minimum value is “0,” after which “255” is
displayed.
• Pressing the ► button increases the number by 1. The maximum value is “255,” after which “0” is
displayed.
• Hold down ◄ or ► to increase or decrease the value continuously.
9. Repeat steps 6-8 to enter the IP address assigned to the printer.
IP Address
=xxx.xxx.xxx.xxx
Network Setting 541