Canon imagePROGRAF iPF510 - Manual (Page 692)

Messages regarding paper
Messages regarding paper
Paper Mismatch
Cause Corrective Action
The type and size of paper as specied on the printer
do not match the type and size specied in the printer
driver. Adjust both settings so that they match and try
printing again.
Paper Mismatch / Prnt:PressOnline
Cause Corrective Action
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Try printing again after adjusting the paper size
and type as specied in the printer driver and the
size and type specied on the printer so that they
match.
The paper type and size as specied in the printer
driver do not match the type and size specied on
the printer.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
Paper Mismatch / ReplcPap:Press↓
Cause Corrective Action
When using multiple sheets to print test patterns for
printer adjustment, you are using sheets of different
sizes or types of paper. Press the ▼ button to eject the sheet and load a
sheet of the same size and type as the rst sheet.
PaprTyp Mismatch
Cause Corrective Action
Make sure the same type of paper is specied on the
printer as in the printer driver.
(→P.82)
(→P.89)
(→P.87)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Either change the type of paper specied in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer.
The paper type as specied on the printer does not
match the type specied in the printer driver.
Press the Online button to resume printing.
However, this may cause a paper jam or printing
problem.
*Printing will continue if you have set Detect Mismatch to Warning or None.
678 Error Message