Aiphone JKW-IP - Manual (Page 44)

44
PC Application Basic Operations
45
5-1-6 Entrance monitoring
You can monitor a door station from the PC Application.
From the "Adaptor" display ( j) in the Expanded
Window, select one door station-connected IP Video
Intercom Adaptor you want to monitor.
1
If an Adaptor is selected, you can release it by clicking it
again.
MEMO
You can only select one Adaptor to monitor the door station. •
Click [MONITOR] ( k).
2
3
Status (Green) MONITOR
MESSAGE <Adaptor Name> DOOR <Door station No.> MONITORING
The image from the door station connected to the selected
Adaptor is displayed, and audio is received.
While monitoring, click [TALK] ( l) to begin talking. At
night, the door station's LED for night illumination lights.
The discrimination between day and night is performed
automatically by the door station.
1.
2.
MEMO
The ent rance monitor ing t u r ns off automatically af ter
approximately 1 minute. To monitor the entrance again,
repeat from
1.
During entrance monitoring, the entrance monitoring time
can be extended by approximately 1 minute by clicking
[MONITOR] again.
During entrance monitoring, the screen is set to the wide
screen display. It switches to the zoom screen when the
[ZOOM / WIDE] button is clicked.
At night, the door station's LED for night illumination does
not light until [TALK] (
l ) is clicked.
•
•
•
•
To finish monitoring, click [OFF] ( m).
4
The PC Application returns to standby status.
When the monitor display time has elapsed, the monitoring
is automatically switched off, and it returns to standby
status.
3.