LG LDE3017SW - Manual (Page 11)

11
ENGLISH
To turn on a SINGLE
surface unit:
(Left Rear, Right Rear)
➊ Press ON/OFF for the desired
element position. The display will
flash .
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
➋ Press + once to turn on the
power level Hi or – once to Lo.
➌
Use the – / + to choose the
desired power setting.
– / + is continuously accessible.
(Adjustable at any time while the
element is ON.)
➍
To turn off the unit after cooking,
press ON/OFF once.
NOTE:
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
• Lo is the lowest power level available.
NOTE:
To scroll through the power levels quickly press and
hold the – or + key pads until the power level
desired is reached.
HOT SURFACE INDICATOR
The display will Flash HS(Hot Surface).
When the surface is too hot to touch
because of the heating element. It will
remain on after the element is turned
off and the surface has cooled to
approximately
150 deg F.
USING THE ELEMENT
S U R FAC E C O N T RO L S C O O K I N G
2 2
1
A B
SINGLE DUAL
CAUTION
• DO NOT touch surface elements until it has
cooled down sufficiently.
- The surface elements may still be hot and burns
may occur.
CAUTION
• NEVER leave food unattended at high or medium-
high setting.
- Boil overs can cause smoke.
Greasy spillovers may catch on fire.