LG LDE3017SW - Manual (Page 21)

21
ENGLISH
O P E R AT I N G I N S T RU C T I O N S
SPECIAL FEATURES OF YOUR OVEN CONTROL
(cont')
How to select language
Your oven control is set to display in English but you
may change this to display in Spanish or French.
➊ Touch the SETTING pad 4 times,
"Lng" will appear in the display.
➋ Touch the # 1 pad for English,
touch the # 2 pad for Spanish,
touch the # 3 pad for French.
➌ Touch the START pad to accept
the change.
How to set preheating alarm light ON/OFF
The interior oven light automatically turn on when the
oven door is opened.
Once the oven is preheated, the oven lamp will flash
until the door is opened.
You can activate or deactivate smart oven light
feature. Default Setting is On.
➊ Touch the SETTING pad 5 times
"Pre" will appear in the display.
➋
Touch the # 1 pad for ON or touch
the # 2 pad for OFF.
➌
Touch the START pad to accept
the change.
How to adjust beeper volume
The beeper volume feature allows you to adjust the
volumes to a more acceptable volume. There are four
possible volume levels, loud, normal, low and mute.
➊ Touch the SETTING pad 6 times
and "BEEP" will appear in the
display.
➋ Touch the # 1 pad for LOUD,
touch the # 2 pad for NORMAL,
touch the # 3 pad for LOW, and
touch the # 4 pad for MUTE.
➌ Touch the START pad to accept
the change.
How to select fahrenheit or celsius
temperature
Your oven control is set to use the Fahrenheit
temperature. This can be changed to Celsius.
➊ Touch the SETTING pad 7 times
and "UNIT" will appear in the
display.
➋ Touch the # 1 pad for F
(Fahrenheit) or touch the # 2 pad
for C (Celsius).
➌
Touch the START pad to accept
the change.
How to change hour mode on Clock
(12HR or 24HR)
Your control is set to use a 12-hour clock. If you would
prefer to have a 24-hour time clock, follow the steps
below.
➊ Touch the SETTING pad 8 times.
Display will change into CLO.
➋ Touch the number 1 pad for
12-hour, 2 pad for 24-hour.
➌ Touch the START pad to accept
the desired change.
SETTING
SETTING
SETTING
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
1
2
or
3
or
1
2
or
SETTING
START
LOCKOUT
1
2
or
1
2
or
3
or
4
or
1 2
SETTING
START
LOCKOUT