English self-diagnosis – LG LP155CED1 User Manual
Page 15
Control Locations
Owner’s Manual 15
ENGLISH
Self-Diagnosis
FUNCTION:
If the unit has a malfunction, a green OPERATIONLED located on the Display PCB used by the unit to
indicate the errors.
USE:
If the customer has to register a complaint to the service center, he can be very clear about registering
the complaint that what is happening & by referring the user's manual the customer can clearly define
the problem.
So that the engineer should go fully prepared with the prescribed tools to be used regarding that
problem. It also keeps the customer aware about the unit.
Here are some of the problems defined below for which the LED indicates by flashing number of times
the error has been reconrded against it.
The errors are the mentioned in the (Table 13) which is as follows:
ON
Normal
OFF
No power / failed board
Fault Codes
CH 01
Indoor Air Thermistor Error
CH 02
Indoor Coil Thermistor Error
CH 03
Outdoor Air Thermistor Error (PTHP Only)
CH 04
Outdoor Coil Thermistor Error (PTHP Only)
CH 05
Mode Error
CH 06
Setpoint Error
CH 07
Bad Thermistor Wiring