Approach Tech DVR-3024M - Manual (Page 33)

31
00 :00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
REC SCHEDULE
OK
START END
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
START END
CANCEL
TO MOVE TO CHANGE
S
M
T
W
T
F
S
CHANNEL 1 2 3 4
DWELL 03 03 03 03 03
SEQUENCER
CLOCK:
This entry allows users to set the system
time.
NOTE: Clock data is retained for about 3 months
after the 15-hour power supply is used up (the
Operate On mode).
DAYLIGHT SAVING:
This entry allows users to set the daylight saving
time.
OFF: Disables the daylight saving time.
US: Daylight saving time begins at 1:00 a.m.
on the first Sunday of April. The
measurement of reverts to standard time
at 2:00 a.m. on the last Sunday of
October.
EUROPE: Daylight saving time begins at
1:00 a.m. on the last Sunday of
March. The measurement of
reverts to standard time at 2:00
a.m. on the last Sunday of
October.
SET: Sets the daylight saving time.
REC ENABLE:
This option enables/disables the programmed
scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time
each day when the DVR will start and stop
recording. There are
2
time periods each
day available for scheduling. The time is
displayed in a 24-hour clock format. If there
is a time overlapping showing between two
continual time period settings, the device
will automatically combine the two
time-period settings into one.
SEQUENCER:
This entry allows users to set the DWELL
time (time interval) for CH1, CH2, CH3, CH4,
and quad view( ). The valid values are 01
~ 99 seconds; if the dwell time is set to 00, it
will disable the corresponding channels,
while the sequential jumping is proceeding.
In the live mode, press the Seq./Save button
to switch the screen to the sequential
jumping is proceed. In live mode, press the
Seq./Save button to switch the screen to the
sequential jumping mode.
TIMER/ SEQ/ TITLE
CLOCK
: SET
DAYLIGHT SAVING : OFF
REC ENABLE : OFF
TIMER : SET
SEQUENCER : SET
TITLE : SET
MAIN PAGE
TIMER REC ENABLE