Approach Tech DVR-3024M - Manual (Page 54)

52
3. Click the button to submit the new
Record / Alarm setting.
4. Click the button to return to the home
page while the new image setting acts on the
images to effect the desired changes instantly.
(If the setting has not been changed by the
above steps, any (re)entry to the home page will
find images in their earlier or original setting. )
5.3.3 Change Timer Record Setting
1. Click the button on the home page to
enter the Record / Alarm setting page.
2. Click the connection on the
Record / Alarm setting page to enter the Timer
Record setting page.
3. Set the TIMER RECORD to ON to enable the
TIMER RECORD function.
4. There are two time-periods available for
scheduling each day. The Timer Record setting
page allows users to program the time each day
that the DVR will start and stop recording. The
time is displayed in a 24-hour clock format. If
there is a time overlap showing between two
continual time-period settings, the device will
automatically combine the two time-period
settings into one combined time-period setting.
5. Click the button to submit the new Timer
Record setting.
6. Click the button to return to the home
page while the new image setting acts on the
images to effect the desired changes instantly.
(If the setting has not been changed by the
above steps, any (re)entry onto the home page
will find images in their earlier or original
setting. )