Removing/assembling the refrigerator door handles, Ambient temperature, Measuring the clearances – LG LFX28995ST User Manual

Page 13: Removing the handles 1, Assembling the handles 1

Advertising
background image

13

INSTALLATION

ENGLISH

Ambient Temperature

Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.

2” (5.08 cm)

24” (61 cm)

Removing/Assembling the
Refrigerator Door Handles

Removing the Handles

1

Loosen the set screws with a

3

/

32

in.

Allen wrench and remove the handle.

2

Loosen the mounting fasteners that
connect to the refrigerator door and handle
using a

1

/

4

in. Allen wrench, remove the

mounting fasteners.

Assembling the Handles

1

Assemble the mounting fasteners at
both ends of the handle using a

1

/

4

in.

Allen wrench.

2

Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a

3

/

32

in. Allen wrench.

NOTE

Removing the doors is always
recommended when it is necessary to
move the refrigerator through a narrow
opening. If it is necessary to remove the
handles, follow the directions below.

Advertising