Caution – LG LFX28995ST User Manual
Page 55
55
SMART REFRIGERATOR DISPLAY SCREEN
ENGLISH
- After the item has been loaded to the
refrigerator, you are able to enter detailed
information about the item, such as quantity
and an expiration date.
- To enter information on an item, touch the
item in the refrigerator.
- Enter desired information into the Food
Details popup. To enter quantity, touch the
+/- buttons. To enter an expiration date, touch
the Change Expiration Date button and use
the +/- buttons to set the date.
- Food with short storage period is notified
to the user daily through Freshness Tracker
widget.
1. When the storage period is entered longer
than normal either because the expiration
date is unknown or because it was entered
incorrectly.
2. When children are playing with the
refrigerator.
3. When the same type of food is stored in the
same location with a time gap, but the food
stored earlier is misjudged to have been
stored later.
4. When the food stored in the freezer is
moved to the fridge but only the storage
location have been changed and not the
storage period.
5. When the time and environment (High
temperature and humidity etc.) are not
considered from the time of purchasing the
food to storing the food.
6. When the food is taken out of the
refrigerator and put back in without being
used and the time passed has not been
reflected.
7. When the food is stored in a different
location after partially being used (Store in
another compartment where same type of
food is stored).
8. When the food with damaged packaging is
set to be stored until normal expiration date.
2) Entering detail information of food (Quantity and Set storage period)
2) Entering detail information of food (Quantity and Set storage period)
3
2
4
1
5
Example of misuse of storage period and storage location setting.
Example of misuse of storage period and storage location setting.
CAUTION
The ending date can differ based on
y
the expiration date and stored condition
of the food and the manufacturer or
the refrigerator manufacturer is not
responsible for the storage period that the
user has set.