LG DU-27FB34C - Manual (Page 19)

Page 19
Auto Program (Channel Search)
Using the optional Installer’s remote control,
press POWER to turn the TV on.
Press MENU repeatedly until the Setup menu
appears.
Using SELECT on the remote control, high-
light Auto Program on the menu.
Press the Right or Left ADJ arrow to go to
the Auto Program menu.
Using SELECT, choose either Cable TV or
Off-Air Antenna on the menu (see Mini Glossary
below).
Press the Right or Left ADJ arrow to begin
the Channel Search.
Press ENTER when the channel search is
completed. This is when the progress bars
are filled and a message “COMPLETED SUC-
CESSFULLY” appears on the screen.
Auto Program finds channels being received
by the TV tuner.
Cable will not work unless you subscribe to a
cable service.
After the channel search is complete, use
the features on the following pages to:
Add/delete/blank channels, Include channel
labels, so that they appear on the channel /
time / audio display. Choose from the preset
label selections.
Use Auto Program to specify over-the-air Antenna or Cable
Service incoming signal source and automatically store all
of the channels found by the channel search in non-
volatile memory. (Do not connect any device to front
video input while TV is in channel search mode.)
1
2
Mini Glossary
On the Auto Program Menu, select:
OFF AIR ANTENNA If only over-the-air channels are available, select Off-Air Antenna.
CABLE TV If you subscribe to a cable service, select Cable TV.
POWER
FLSHBK
MUTE
CC
CHANNEL
VOLUME
ENTER 0
9 8 7
6 5 4
3 2 1
ALARM
CH PREVIEW AUDIO
TIMER MENU
SELECT
ADJ ADJ
TV/FM
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
SOURCE NAME
CLOCK SET
TIMER
CAPTIONS
LANGUAGE TO PROGRAM
SETUP MENU
1
2
3/5
4/6
3
4
5
6
7
7
Channel search for digital channels will follow
the analog channel search automatically.
After changing from CABLE TV to OFF AIR ANTENNA
(and vice versa) it is necessary to perform the auto program
function in order to get the proper digital information.
Note: If necessary, select tuning band (Cable 1 or Broadcast 0) for Installer Menu item 3-I Band-AFC before doing
a channel search.