LG DU-27FB34C - Manual (Page 47)

Page 47
14-I. NOT USED
15-I. SLEEP TIMER
When set to 1, the Sleep Timer feature is available
to the user (but no message is displayed prior to
turn-off). When set to 0, the Sleep Timer is not
functional.
16-I. EN. TIMER
Set to 1, On/Off Timer functions are available to
end user. Set to 0 to disable Timer functions.
Note: Clock must be set in order to use Timers.
17-I. ALARM
Gives you the option of making the Alarm function
available to the user. Set to 1, Alarm function is
available to user. Set to 0 to disable the Alarm
function. Note: Clock must be set in order to set
the Alarm.
18-I. NOT USED
19-I. NOT USED
20-I. FEATURE LEVEL
Default set to ZEN 1 for Zenith IR remote control
operation. Set O, P LBL for Zenith Private Label IR
remote control operation. WARNING: Do not
change the default value unless you have the prop-
er remote control to operate the TV.
21-I. V-CHIP
Set to 1 to activate V-Chip (Parental Control); have
it available to user to filter or control or restrict
programming content. Set to 0 to turn V-Chip fea-
ture off, not available to user; no programming
restrictions can be set.
22-I. MAX BLK HRS
Set 0 to 99 for the maximum V-Chip (Parental
Control) block hours. Default setup is for 12 block-
ing hours.
23-I. CAPTION LOCK
Set to 1 to restore previous Caption On/Off state
after TV turns off. When set to 0, Captions are
always off, when TV is initially turned on.
24-I. TEXT MODE
Determines whether TEXT 1, TEXT 2, TEXT 3, or
TEXT 4 decoding is enabled when TEXT is turned on
(either from the Setup Menu or directly with CC on
the remote).
TIP: Set Text Mode to 1 only if text is offered in
your video system.
25-I. FUNCTION PRE
Set to 0 to suppress CHANNEL PREVIEW from the
FUNCTION menu with some Pay-Per-View systems.
26-I. NOT USED
27-I. NOT USED
28-I. CH. OVER RIDE (Channel Override)
When set to 1, the user can select channels with
either Channel Up/Down or by direct keypad entry.
When set to 0, only those channels that are
entered for scanning may be selected by direct
keypad entry. Note: If set to 0, Auto Program is
locked; (as shown on Setup menu) channel search
is not available.
29-I. OLD OCV (On Command Video TM )
Set to 1 for operation with systems from On
Command Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at
default setting unless changed by Pay-Per-View
provider.
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
33-I. NOT USED
34-I. CAMPORT ENABLE
Set to 1 to enable the front AUX (Camport)
input. Set to 0 to disable front AUX input.
35-I. SUP. PORT YUV
Reserved for future use.
36-I. FRONT Y-C EN.
Set to 1 to enable the front S-Video input.
Set to 0 to disable front S-Video input.
Installer Menu
Detailed Descriptions for Installer Menu Items 14-I through 36-I