LG LBC24360SW - Manual (Page 18)

18 INSTALLATION
ENGLISH
Removing the Freezer Door
(On Freezer Swing Models)
Before beginning, make sure you completely
remove the refrigerator door.
See Removing the Refrigerator Door (p.15)
Assembling the Freezer Door
(On Freezer Swing Models)
1 Place the freezer door down on the bottom
hinge pin.
2 Put the washer between the freezer door
and the middle hinge.
3 Attach the middle hinge with the
previously removed two bolts and screw.
Reattach the middle hinge pin using a 1/4
in. hex socket wrench.
CAUTION
Use two or more people to remove and y
install the freezer door. Failure to do so
can result in back or other injury.
When you lay the door down, be careful
y
not to damage the floor.
Do not sit or stand on the freezer door.
y
To prevent accidents, keep children and y
pets away from the door. Do not leave
the door open.
1 Use a 1/4 inch hex socket wrench to
loosen and remove the hinge pin from
the middle hinge bracket. Use a 10 mm
or 13/32 inch socket wrench to remove
the two bolts. Remove the screw and
the washer, and set the middle hinge and
other parts aside.
2 Carefully lift up the freezer door. Remove
and place it on a non-scratching surface.
Bottom
Hinge Pin
Bottom
Hinge Pin
Screw
Middle Hinge Pin
Washer Bolts
Middle Hinge
Screw
Middle Hinge Pin
Washer Bolts
Middle Hinge
1_MFL67855701_Eng.indd 18 2013.7.24 11:45:14 AM