LG LBC24360SW - Manual (Page 33)

33 HOW TO USE
ENGLISH
NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
Control Pad
* Depending on the model, some of the following functions may not be available.
Control Pad Features
Control Button
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C
(or vice versa) press and hold the
Refrigerator
and Freezer temperature buttons simultaneously
for approximately five seconds. The temperature
indicator on the display window switches
between Celsius and Fahrenheit.
Ice Plus
This function increases both ice making and
freezing capabilities.
When you press the y Ice Plus button, the light
will be on in the display and will continue for
24 hours. The function will automatically shut
off after 24 hours.
You can stop this function manually by
y
pressing the button one more time.
Door Alarm
When power is connected to the refrigerator, y
the door alarm is initially set to ON. When you
press the Alarm button, the light will change
to OFF and the Door Alarm function will
deactivate.
When either the refrigerator or the freezer
y
door is left open for more than 60 seconds,
the alarm tone will sound to let you know that
the door is open.
When you close the door, the door alarm will
y
stop.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated, OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. The control
panel will beep and the temperature settings
will display to confirm that Display Mode
is deactivated. Use the same procedure to
activate the Display Mode.
LED Display Indicator
1_MFL67855701_Eng.indd 33 2013.7.24 11:45:32 AM