LG LBC24360SW - Manual (Page 21)

21 INSTALLATION
ENGLISH
NOTE
The bracket has been flipped, but the
hinge pin stays in the same orientation
with its hexagonal end facing upward.
7 With a flat-head screwdriver, carefully pry
off and remove the cover over the bolt
holes on the left side of the refrigerator.
8 Remove the outer lower decorative screw
from the flange on the frame between
the freezer and refrigerator doors. (You
will need this hole for the middle hinge
bracket.)
9 Flip the middle hinge bracket and position
it on the left side of refrigerator and
reattach with two bolts and a screw.
10 Reattach middle hinge pin using a ¼ inch
socket wrench.
Middle Hinge
Pin
Middle Hinge
Bracket
13 Place the refrigerator door down over the
hinge pin on the middle hinge pin bracket.
11 Insert the decorative screw into the outer
hole on the right side of the flange. Attach
the cover on the right side. Cover is force-
fitted.
12 Loosen the two screws and remove the
left hinge cap.
Decorative
Screw
1_MFL67855701_Eng.indd 21 2013.7.24 11:45:19 AM