Connecting the drain line – LG WM3650HVA User Manual

Page 15

Advertising
background image

15

INSTALLATION INSTRUCTIONS

ENGLISH

Using a laundry tub

1

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from

the end of the drain hose. If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
elbow bracket, mold, or microorganisms could spread to
the inside of the washer.

No more than

4 inches (10 cm)

Elbow bracket

2

Hang the end of the drain hose over the side of the

laundry tub.

Elbow Bracket

Drain Hose

3

Use a tie strap to secure the drain hose in place.

Connecting the drain line

Secure the drain hose in place to prevent moving and leaking.

NOTE

y The drain hose should be properly secured. Failure to

properly secure the drain hose can result in flooding
and malfunction.

y Total height of the house end should not exceed 96

inches (244.8 cm) from the bottom of the washer.

y The drain must be installed in accordance with any

applicable local codes and regulations.

y Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

Using a standpipe

1

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from

the end of the drain hose. If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
elbow bracket, mold or microorganisms could spread to
the inside of the washer.

No more than

4 inches (10 cm)

Elbow bracket

2

Insert the end of the drain hose into the standpipe.

Drain Hose

Elbow Bracket

3

Use a tie strap to secure the drain hose in place.

Advertising