LG DLGX8501V - Manual (Page 42)

42 hOW TO USE TAg ON
Tag On cycles download using Lg Smart Laundry&DW application
NOTE
• The Tag On Cycle Download feature lets you use your smart
phone to download a new cycle to your dryer, replacing the
Super Dry cycle. The Super Dry Cycle can always be
re-downloaded, if desired.
1 Install ‘LG Smart Laundry&DW’ app on a NFC-equipped
smartphone.
- Install the app from the Play store and run it.
2 Select Tag On.
Home card and icons at the
bottom of the screen are all
available to use.
3 Select Tag On Cycles Download.
4 Touch the Tag On logo.
- When a Tag On screen appears (see
at right), tap your smart phone on the
Tag On icon on the right side of the
dryer’s control panel.
- If it isn’t recognized, touch on
the upper right of the Tag On screen
on your ‘LG Smart Laundry&DW’ app
to see the detailed guide. (This might
happen due to the different NFC
antenna positions for each phone.)
5 Select a cycle to download.
- You can also check the existing
cycles already downloaded.
6 Touch the Tag On logo.
- When a Tag On screen appears
(see at right), tap your smart
phone on the Tag On icon on the
right side of the dryer’s control
panel.
- If it isn’t recognized, touch
on the upper right of the Tag On
screen on your LG Smart
Laundry&DW app to see the
detailed guide. (This might
happen due to the different NFC
antenna positions for each
phone.)
7 The new cycle is downloaded successfully!
- Check whether the new cycle is downloaded by turning the
cycle selector knob to Download Cycle/Super Dry.
※ Images are for reference only. The LG Smart
Laundry&DW application may be updated.
MFL67731015_en_140128.indd 42 2014.1.28 4:19:24 PM