Using smartdiagnosistm – LG DLGX8501V User Manual

Page 47

Advertising
background image

47

ENGLISH

USING SMARTDIAGNOSISTM

If you experience problems with your dryer, call 1-800-243-0000 (1-888-542-2623 in Canada). Follow the call center agent’s instructions,

and do the following steps when requested:

1. Press to turn on the dryer. Do not press any other buttons.

2. When instructed to do so by the call center agent, place the mouthpiece of your phone very close to the POWER button.

3. Press and hold TEMP.CONTROL button for three seconds, while holding the phone mouthpiece to the icon or POWER button.

4. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds, and the display will count down the

time.

• For best results, do not move the phone while the tones are being transmitted and do not touch the control panel with the phone.

• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.

• Pressing the POWER button during the transmission will shut off the SMARTDIAGNOSIS™.

5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able

to assist you using the information transmitted for analysis at the call center.

Language

English

Français

Español

NOTE

- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax

machine, and so has no meaning except to the call center.

- SMARTDIAGNOSIS™ cannot be activated if the dryer does not power up. If this happens, then troubleshooting

must be done without SMARTDIAGNOSIS™.

USINg SMARTDIAgNOSIS

TM

MFL67731015_en_140128.indd 47

2014.1.28 4:19:30 PM

Advertising