LG LCE30845 - Manual (Page 14)

14
OPERATING INSTRUCTIONS
To turn on the cooktop, touch the
POWER pad for approximately
2 seconds. The indicator above
the pad will light. NOTE: After turning on the cooktop with
the POWER pad, you must select one of
the Cooking Zones within 20 seconds using
the Cooking Zone ON/OFF pad(s). If no
selection is made, the cooktop will turn off
for safety reasons.
Before using the cooktop for the first time, clean
it thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will
remove any help protect the ceramic surface
and make future cleanup easier.
BEFORE USING THE COOKTOP
Never use scrub pads or abrasive cleaners.
They can cause permanent damage to the
cooktop surface.
To operate the touch control pads, touch the pad
firmly with the flat part of your fingertip.
SETTING THE CONTROLS
FIRST OPERATION
The first time that power is supplied to the
cooktop,
will flash in the display for each
cooking zone for 60 seconds or until the
POWER pad is touched for approximately
2 seconds.
NOTE: will also flash when power is restored
after a power outage.
ACTIVATING THE COOKTOP
To select the desired Cooking Zone,
press the ON/OFF pad. The display for
the selected Cooking Zone will show
and and an indicator will light to indicate
that the Cooking Zone is on but no
power level is set.
NOTE: Once the Cooking Zone has been
selected with the ON/OFF pad, the power level
must be selected within 5 seconds with the
or
pad. Otherwise, the Cooking Zone
will turn off for safety reasons.
SELECTING THE COOKING ZONE
CAUTION