LG LRV790R - Manual (Page 16)

14
OVERVIEW
4.5 
4.5 
6 
1
Install the home station.
Insert the power cord plug into an outlet and locate the
station against a wall. If power is not supplied to the
home station, the Hom Bot will not charge.
2
Turn on the power supply of the Hom Bot.
Turn on the power switch located on the rear­left side
of the Hom Bot. Press the Start/Stop button on the
Hom Bot or the Start button on the remote control.
3
Check the dust bin.
Make sure that the dust bin is not full. If the dust bin is
full, then empty if before cleaning.
5
4
Start cleaning.
Select the desired cleaning mode.
Press the Start/Stop button on the Hom Bot or the
Start button on the remote control.
To change the cleaning mode, press the mode button
on the remote control or Hom Bot.
6
Automatic charge.
The Hom Bot will automatically return to the home
station to charge. If the Hom Bot is in the middle of
cleaning and runs out of battery, it will return to the home
station to charge and then continue cleaning where it left
off once the battery is fully charged.
It takes approximately three hours for the battery to fully
charge.
WARNING
When Hom Bot is operated with the cover of the dust bin open,
it can cause an injury or serious damage to the product.