LG LRV790R - Manual (Page 35)

33
CLEANING THE SENSOR/CHARGING TERMINAL
Upper camera
sensor
• Do not clean the Hom Bot by directly spraying it with water, thinner, benzene, or any other
liquids.
• Call the service center if the sensor or charging terminal is damaged. Sensor and terminal
damage can cause the product to malfunction.
• To clean the sensor/charging terminal, use the cleaning brush.
There are sensors on the Hom Bot that detect obstacles, stairways
and the home station for charging the battery. In order to maintain the
performance of the Hom Bot, regularly clean the sensors and charging
terminal as follows:
1. Turn off the power switch on the bottom of the Hom Bot. Injury can
be caused by the activation of the Hom Bot if the main power is not
turned off.
2. Lay a smooth cloth on the floor, overturn the Hom Bot and put it on
the cloth.
※ Please make sure to remove the dust bin before rotating the main
body. Otherwise, the dust in the dust bin may fall out.
3. Use a smooth cloth or cleaning brush to wipe the dust off each cliff sensors, camera sensors and
ultrasonic sensors and the charging terminal as described below.
Charging terminal
Ultrasonic sensors
Obstacle detecting
sensor window
Detecting sensors
of home station &
Receiving sensors of
remote control
Cliff detection
sensor
Charging terminal
Bottom camera
sensor
Lens
Tip