LG H20J54DT - Manual (Page 38)

Page 38 206-4065
Channel Banks Setup
Use the Channel Banks to customize the channel offerings to the end user
The TV has four channel banks, where the administrator or installer can store
groups of TV channels. Note: Channel banks set up requires an installer’s remote
with “Source” or “Bank” keys.
Planning The Channel Banks
Generally, TV channels are grouped into “program
packages” with terms that are proposed to the end
user. The user then opts for a package. Below is an
example of how TV channels may be grouped.
You may plan your package by using a chart like
the one after the following page. Remember, you
can “blank” a channel for accommodating audio-
only, such as an in-house communication channel.
Sometimes, only one or two channel banks may be
needed. You may leave any unused bank with the
channels entered during Auto Program; or, you may
delete the channels. However, you may want to
leave at least one channel in any unused bank.
Then, if someone selects an “unused” bank, that
channel will assure them that the TV is functional.
Note: Some channels from factory testing may be
in the channel banks if you have not yet run Auto
Program.
Adding/Deleting Channels
A previously prepared programming chart is help-
ful. (See next page.)
1. Run Auto Program (in the Setup menu). All
channels found on your cable/antenna will be
entered in Channel Bank 1, 2, 3, and 4.
Note: Be advised that running Auto Program
overwrites any custom channel setups e.g.
removes Blanked, Deleted.
2. Select a channel bank with the installer remote
- - press SOURCE/BANK (and repeat). CHANNEL
BANK and BANK number are displayed.
3. Use the ADD/DEL/BLNK option (also in the
Setup menu) to customize your program pack-
age. You may delete channels or add some that
have not been entered. You can also ‘Blank’ a
channel for accommodating an audio-only pro-
gram source or in-house communication. See the
“ADD/DEL/BLNK” menu page for more details.
Note: The Blank Channel feature is global. A
channel will be blanked in all channel banks.
4. Repeat steps 2, and 3 to program another chan-
nel bank.
Inactive TV Display (Channel Bank 4)
The TV can be set up to be inactive; which would
require an attendant using an installer remote to
change to a “billable” active channel bank selec-
tion: Bank 1, 2 or 3.
Note: For institution control of patient-accessible
programming, channels in Bank 4 need to be
removed.
Bank Program Package
1 Basic cable channels
2 Extended cable channels
3 Extended with premium channels
4 Other cable service options
(Grouping is provided as an example only.)
CHANNEL BANK 1
The BLNK (blank) channel function is “global”
-- the same channel number is blanked in channel banks 1, 2, 3 and 4.
Channel Bank Number Display
INACTIVE TV
PLEASE . . .
CALL ATTENDANT
Inactive TV Display