LG H20J54DT - Manual (Page 49)

Page 49 206-4065
Installer Menu
Detailed Descriptions for Installer Menu Items 71-I through 90-I
71-I. BCK CH-T COL (Channel-Time Display
Background Color) See Notes on page 48.
0 = Black
3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
Note: If foreground and background color are the
same, menu background is transparent.
72-I. NOT USED
73-I. CH NOT AVBLE (Channel Not Available)
When set to 1 and channel override is set to 0,
“NOT AVAILABLE” message is displayed when
directly accessing a channel not in the favorite
channel list. (Applies to NTSC Channels Only.)
74-I. CH-TIME SIZE
If set to 1 and transparent background is selected
for Channel-Time display, (foreground color = back-
ground color and custom color enabled) a large
channel number is displayed instead of the normal
Channel-Time display.
75-I. REVERT CH (Revert Channel)
If set to 1 and loss of M.P.I. communication
occurs, TV automatically tunes to the specified
Start Channel.
76-I. DEFEAT XDS
Set to 1 to disable XDS display. Set to 0 to enable
XDS display. XDS data (provided at the discretion
of the broadcaster), is available only on analog
channels. After a channel change, wait 5 seconds
then press ENTER to see XDS data, if available.
77-I. QUICK SHUTOFF
Allows TV power Off event to be controlled by all
Remote Contol, TV front Panel and Pillow Speaker
Channel Up/Down buttons. User would push and
hold channel button down for time required to
have TV turn Off. Setting 0 = disabled. Value Range
0 - 17, each number represents 1/2 second.
For example, if set to 4, TV would turn Off if user
held any channel button down for 2 seconds.
78-I. UPN MSB
User programmable number, most significant byte
readable by M.P.I. command.
79-I. UPN MSB-1
User programmable number, most significant
byte-1 readable by M.P.I. Command.
80-I. UPN MSB-2
User programmable number, most significant
byte-2 readable by M.P.I. command.
81-I. UPN LSB
User programmable number, least significant
byte readable by M.P.I. command.
82-I. CHKSM ERROR
Enforces rigid M.P.I checksum validation.
Set to 1 for validation.
Set to 0 to turn off.
83-I. HANDSHK TIME
Adds an additional delay to the handshake time
which is 64 msec, thus relaxing M.P.I. timing
requirements to be compatible with PC based
Windows controlled systems, range is 0 - 5.
Set to 0 to retain standard 64 msec delay.
Set to 1 - 5 to increase @ 16 msec ea., the delay
up to 144 msec.
84-I. PERMANENT BLK
Allows Parental Control blocking schemes to be
permanent by removing the blocking hours func-
tion.
Set to 1 to install Parental Control blocking restric-
tions permanently.
Set to 0 for user-specified hours control of block-
ing schemes.
85-I. NOT USED
86-I. NOT USED
87-I. NOT USED
88-I. EN NOISE MUTE
If set to 1, the audio signal volume is limited to a
minimum value if no signal is being received from
the broadcaster.
89-I. POKE ENABLE
If set to 1, writing to Non-volatile Memory thru
M.P.I. is enabled.
90-I. KEY LOCK
If set to 1, front keyboard buttons Channel,
Volume and Captions are disabled, Power button
remains enabled. If set to 0, front keyboard
Channel, Volume, Captions and Power buttons are
all enabled.