Accessing is-iii, Overview, Logging into is-iii – AT&T MERLIN LEGEND 555-601-010ADD User Manual
Page 27: Chapter 2 - accessing is-iii, Log into is-iii, Chapter 2
Accessing IS-III
2
Overview
This chapter provides the procedures that you will use to access IS-III. To administer
an IS-III application or perform any on-going system maintenance, you must access
the Integrated Solution III Main Menu. However, before you can access this menu,
you must first log into IS-III.
Logging Into IS-III
The Iogin procedure allows you to access the Integrated Solution III Main Menu.
During this procedure, you identify yourself to the system by entering your Login ID.
The system then prompts you to enter your password (if a password has been
administered). The system uses the Login ID and passwords to prevent unauthorized
individuals from accessing the system.
To log into IS-III, perform the following steps:
1.
At the
Console Login:
prompt, type
is
and press [
ENTER
↵
].
—
—
If a password has been administered, the system prompts you to enter
your password. At the
Password:
prompt, type your password and
press [
ENTER
↵
]. (For security reasons, your password does not appear
on the screen as you type it.) The Status Screen appears.
If no password has been administered, the Status Screen appears.
2-1