AT&T 993 2-Line - Manual (Page 36)

33
Telephone operation
Basic operation
Redial
The last number dialed on this telephone (up to 24 digits)
is stored in redial memory until another number is dialed.
Handset
To dial the same number again, lift the handset, listen for
the dial tone, and press
(AUTO) REDIAL.
Speakerphone or headset
To dial the same number again, press
SPEAKER or
HEADSET, then press (AUTO) REDIAL. The telephone
automatically dials the last number using the primary line
selected. (See
Set the primary line on page 9.)
To dial the same number using a specific line, press
SPEAKER or HEADSET. Press the desired LINE button,
then press
(AUTO) REDIAL.
NOTE: There may be a delay before the number is dialed when
using the redial feature. This is normal.
Display dial
The display dial memory contains either the last incoming
telephone number received on the telephone, the last
number reviewed in call history, or the last number
reviewed in the directory, whichever is the most recent. It
is shown on line 4 of the display.
Handset
To dial the displayed number, lift the handset, listen for
the dial tone, then press
ENTER.
Speakerphone or headset
To dial the displayed dial number, press
SPEAKER or
HEADSET, then press ENTER.
To dial this number on a specific line, press
SPEAKER or
HEADSET, then press a LINE button and press ENTER.
Redial :
908555000
Display Dial :
908-555000