AT&T 993 2-Line - Manual (Page 52)

49
Directory
Directory operation
Dial a number from the directory
Press DIR.
Press ENTER and or to view entries.
Press ENTER. The screen displays DIAL.
Press ENTER to dial the number on the screen. The
call is dialed in the mode (speakerphone or headset)
programmed (see
Set preferred mode on page 2)
using the primary line programmed (see Set the
primary line on page 9).
— OR —
Lift the handset or press
SPEAKER or HEADSET, then
press ENTER. The telephone automatically selects an
idle line and dials the number.
— OR —
Press a
LINE button to select a line, then press ENTER.
The number is dialed in the mode (speakerphone
or headset) programmed (see
Set preferred mode
on page 2). The screen displays the number while
dialing.
Remove a name and number from the directory
Find the entry for the number to be deleted by
following the directions under
Review directory
entries on page 47.
When the desired entry is displayed, press
REMOVE.
The screen briefly displays the directory entry and
REMOVED! Then, it automatically returns to the first
directory entry.
.
2.
3.
4.
.
2.
JIM
57754
DIAL
AARON
57754
REMOVED !