Avocent DSR1021 - Manual (Page 106)

94 DSR1021/1022 Switch Installer/User Guide
Escape 24
Flag dialog box 32
Keyboard dialog box 40
Main dialog box 21
menus 25
Name Modify dialog box 27
Names dialog box 26, 27
Navigating 24
Print Screen 24
Scan dialog box 35
screen delay 23
Screen Saver dialog box 37
set a Screen Delay Time 29, 31
Single-click, Enter 24
Status Flags 31
Status symbols 22
User Status dialog box 42
Version dialog box 44
P
Point-to-Point Protocol 5
Position Flag 32
POWER LED 11
PPP 5
Print Screen 24
OSCAR interface 25
procedure
To access the OSCAR interface Broadcast
dialog box 33
To access the OSCAR interface Commands
dialog box 41
To access the OSCAR interface Devices dialog
box 28
To access the OSCAR interface Flag dialog box
31
To access the OSCAR interface Menu dialog
box 30
To access the OSCAR interface Names dialog
box 26
To access the OSCAR interface Screen Saver
dialog box 37
To access the OSCAR interface Setup dialog
box 26
To add a user to the DSR switch database 74
To add target devices to the scan list 35
To assign a device type 29
To assign names to target devices 27
To broadcast to selected target devices 34
To cancel scan mode 37
To choose the display order of target devices 30
To configure a DSRIQ-SRL module 82
To configure network settings using the Console
menu 71
To configure the OSCAR interface screen delay
23
To connect a DSRIQ module to a serial device
10
To connect a DSRIQ module to a server 9
To connect and power up your DSR switch 8
To create a DSRIQ-SRL module macro 82
To determine how the Status flag is displayed 32
To disconnect a user 42
To disconnect from a target device 23
To display version information 44
To exit screen saver mode and log in to the local
port 38
To immediately turn on the screen saver 39
To list target devices alphabetically by name 28
To remove a target device from the scan list 36
To remove a user from the DSR switch database
75