Avocent DSR1021 - Manual (Page 53)

Chapter 3: Local Port Operation 41
Managing Server Tasks Using the OSCAR Interface
From the OSCAR interface Commands dialog box, you can manage your DSR1021/1022
switching system and user connections, enable the Scan and Broadcast modes and update your
firmware. Table 3.5 lists commands you can use to manage routine tasks for your target devices..
Table 3.5: Commands to Manage Routine Tasks for Target Devices
Feature Purpose
Broadcast Enable Begin broadcasting to target devices. Configure a target device list for broadcasting
under the Setup dialog box.
Scan Enable Begin scanning target devices. Set up a target device list for scanning in the Setup
dialog box.
User Status View and disconnect users.
Display Versions View version information for the DSR1021/1022 switch. Also view and upgrade
firmware for individual DSRIQ modules.
Reset PS/2 Re-establish operation of PS/2 keyboard and mouse.
To access the OSCAR interface Commands dialog box:
1. Press Print Screen to launch the OSCAR interface. The Main dialog box appears. See Figure
3.1 on page 21 for an illustration of the Main dialog box populated with sample data.
2. Click Commands to open the Commands dialog box as shown in Figure 3.15.
Figure 3.15: Commands Dialog Box