Avocent DSR1021 - Manual (Page 50)

38 DSR1021/1022 Switch Installer/User Guide
Figure 3.13: Screen Saver Dialog Box
To set the Screen Saver options:
NOTE: The Screen Saver password is set within the DSView 3 software. For more information, see the DSView
Installer/User Guide.
1. Type the number of minutes for Inactivity Time (1-99) to delay activation of the password
protection and screen saver features.
2. For Mode, select Energy if your monitor is E NERGY S TAR® compliant; otherwise,
select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
E
NERGY S TAR® .
3. (Optional) Click Test to activate the screen saver test which lasts 10 seconds and then returns
to the Security dialog box.
4. Click OK to save settings.
To exit Screen Saver mode and log in to the local port:
1. Press any key or move the mouse.
2. If Screen Saver security was turned on in the DSView 3 software, a login screen appears. Enter
your username and password and then click OK. If you do not know your username and
password, see the DSView 3 software administrator.
3. The Main dialog box appears and any previous target device connection is restored.