Assigning target device names, Figure 3.2: setup dialog box – Avocent DSR1021 User Manual
Page 38
26 DSR1021/1022 Switch Installer/User Guide
To access the OSCAR interface Setup dialog box:
1. Press
Print Screen
to open the OSCAR interface. The Main dialog box appears. See Figure
3.1 on page 21 for an illustration of the Main dialog box populated with sample data.
2. Click Setup to open the Setup dialog box as shown in Figure 3.2.
Figure 3.2: Setup Dialog Box
Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The
Names list is always sorted by port order. You can toggle between displaying the name or the EID
number of each DSRIQ module, so even if you move the target device to another port, the name
and configuration will be recognized by the switch.
NOTE: If a target device is turned off, its respective DSRIQ module will not appear in the Names list.
To access the OSCAR interface Names dialog box:
1. If the OSCAR interface is not open, press
Print Screen
. The Main dialog box appears. See
Figure 3.1 on page 21 for an illustration of the Main dialog box populated with sample data..