Script file options – HP ProLiant DL380 Server User Manual
Page 39
OnlineSpare = None | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |
Port:Box:Bay,Port:Box:Bay,... ; COMMENT: These values are available
only in Custom method mode. In Auto method mode, the choices are
Yes|No.
Drive = * | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |
Port:Box:Bay,Port:Box:Bay,...
DriveType = SCSI | SAS | SATA
LogicalDrive = 1|2|3|...32
RAID = 0|1|5|50|6|60|adg|auto ; COMMENT: RAID 6 and 60 are only
available when SAAP is installed and the license key registered
ParityGroups = 2|N ; COMMENT: Necessary only for RAID 50 or 60. N
> 2
Size = [N]|Max
Sectors = 32|63
StripeSize = 8|16|32|64|128|256
ArrayAccelerator = Enable|Disable
LogicalDriveSSPState = Enable|Disable
SSPAdaptersWithAccess = [N],[N]...|None
PreferredPath = 1|2
HBA_WW_ID = WWN
ConnectionName = UserDefinedName
HostMode = Default | Windows | Windows(degrade | openVMS | Tru64 |
Linux | Solaris | Netware | HP | Windows Sp2 ; COMMENT: The
Windows(degrade value must be entered as written.
Script file options
Options in ACU script files are divided into the following categories:
•
•
“Controller category” (page 41)
•
•
“Logical Drive category” (page 45)
•
Each category has several scripting options, but you do not always need to assign values to every
option. ACU can use default values in some instances, while in other instances, a listed option
might not be relevant for a particular configuration or scripting mode.
The options for each category are listed in the following table and described in more detail in the
remainder of this section.
Description
Options
Category
These options define the overall
behavior of ACU when it processes
Action
Method
Control
scripts and creates configurations.
Using HPACUSCRIPTING
39