Creating a network share, Adding drivers to windows pe 2.1 – HP ProLiant DL380 Server User Manual
Page 8
Creating a network share
To create a network share:
1.
Download the appropriate Scripting Toolkit SoftPaq from the Toolkit website
).
2.
Install the Toolkit SoftPaq on a common server that resides on the same network as the servers
to be deployed.
3.
Share the folder in which you installed the Toolkit. Be sure that the account you use has read
and write access.
4.
Create an empty directory called \DATA in the Toolkit folder for configuration files. Captured
files are stored in this directory.
HP also recommends installing the latest version of the HP Service Pack for ProLiant. To obtain the
most current SPP, see the SPP website (
.
Adding drivers to Windows PE 2.1
The Scripting Toolkit contains HP drivers that are to be used with Windows PE 2.1. The drivers
are located in the hpDrivers directory of the Scripting Toolkit. Run the executable file in this
directory, and then click Extract to extract the drivers to a location to be used in the following steps.
You can add drivers to Windows PE either offline or online.
To add drivers offline:
8
Deployment using the Scripting Toolkit