HP ProLiant DL380 Server - Manual (Page 40)

Description Options Category
Control options can occur only once in
a script file and must be listed first.
Options in this category specify the
controller that is to be configured (or Controller
ChassisName
Controller
the controller that had its configuration
ClearConfigurationWithDataLoss
captured). Although the Controller
option must begin this section of the
DeleteLicenseKey
script, you can script other options in
this category in any order.
DPOEnable
ElevatorSortEnable
You can use one script file to configure
all controllers in a system, and you can
ExpandPriority
configure the controllers identically or
IRPEnable
individually. If you define each
LicenseKey
controller configuration individually,
MNPDelay enter the option values for one
controller and its arrays and logical
PreferredPathMode
drives before specifying the option
values for another controller.
QueueDepth
ReadCache
RebuildPriority
SSPState
SurfaceScanDelay
WriteCache
These options describe an array that is
to be configured on the controller that Array
Drive
Array
was previously specified in the script.
DriveType
(If no controller was previously
specified, ACU stops processing the
OnlineSpare
script and creates an error file.)
Although the Array option must begin
this section of the script, you can script
the other options in this category in any
order.
These options describe a logical drive
that is to be configured on an array that ArrayAccelerator
LogicalDrive
Logical Drive
was previously specified in the script.
LogicalDriveSSPState
(If no array was previously specified,
ACU stops processing the script and
ParityGroups
creates an error file.) Although the
PreferredPath
LogicalDrive option must begin this
RAID section of the script, you can script the
other options in this category in any
order.
Sectors
Size
SSPAdaptersWithAccess
StripeSize
These options specify an HBA that is to
be configured. ConnectionName
HBA_WW_ID
HBA
HostMode
Control category
The Control category has the following options:
•
“Action mode” (page 41)
•
“Method mode” (page 41)
40 Toolkit utilities